Turbo Reference for a 83 200block

[Anonymous]

anyone know of where I can purchase a turbo for this 200 3.3litre block?

 

[Anonymous]

or a super charger thank you=)

 

[Anonymous]

If it were only that simple.... unfortunately (only in this aspect of course), these aren't Honda Civics. If you want forced induction, you will need to research, design, locate parts, build, and tune it on your own - kind of a custom thing. That's what makes these engines so enjoyable, or at least for most of us around here.

 

[Anonymous]

well I was thinking of a t-25 garret turbo

 

[6-2-go]

You want to try and match flow rates through the turbo. Try looking for a Datsun/Nissan turbo from a 280ZX; the 2.8 litre engine revs higher than the 3.3 but the larger displacement of the 3.3 should offset the higher revs of the 2.8.

 

[rbohm]

well I was thinking of a t-25 garret turbo

8) i would recomend the T3/T4 hybrid turbo for your motor. it builds boost early with the smaller turbine housing, and has the flow capacity of the larger T4 turbo on the intake side. the mustang svo and tbird turbo coupe guys like to use them just for those reasons.

 

[scottiedawg66]

i second that. But i think my t04b is a good cheap way to turbo as well. You can source a good to4b for around $300, just make sure it has a wastegate.

~scott