lavron
Well-known member
CNC-Dude":3byfkaht said:Your problem starts way before the collector. In the above pics, you have several inches of clearance between the frame and tubes before the collectors come together. If the primary tubes weren't bent out of the header flange so sharp, then the collector would have more clearance around the starter.
I totally agree with that, the problem is the header is not made for a 250 (or a low mount starter 200, I would guess) I am going to use the stainless header but need to come up with a solution that is more elegant than what I subjected this header too :roll:
I will test a spacer and wedge under the header flange and see if that is the answer and then figure out how to make one if that works.
Thanks.
See Ya,
Mike